© 2023, Trimble Inc. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Inc., registered in the United States and in other
countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
All other trademarks are the property of their respective owners. (05/23)
Trimble Building Construction Field Solutions
10368 Westmoor Drive
Westminster CO 80021 USA
fieldtech@construction.trimble.com
fieldtech.trimble.com
Trimble X7
3D Laser Scanning System
DATASHEET
TRIMBLE X7 SPECIFICATIONS
Scanning EDM Laser Class Laser class 1, eye safe in accordance with IEC EN60825-1
Scanning Speed Up to 500kHz
Scan Duration4 Fastest 1 min 34 sec without images, 2 min 34 sec with images,
Range Principle High speed, digital time-of-flight distance measurement
Range1 0.6 m - 80 m
Range Accuracy2 2 mm
Range Noise2 <3 mm @ 60 m on 80% albedo3
Imaging
Imaging Sensors 3 coaxial, calibrated 10MP cameras
Raw Image Capture
Fast 1 minute - 15 images - 158MP Quality 2 minutes - 30 images -
316MP
Automatic Level Compensation
Range ± 5°
Accuracy < 3" = 0.3 mm @ 20 m
Environmental
Operating Temperature –20 °C to 50 °C (–4 °F to 122 °F)
Ingress Protection Rating IP55 (dust protected and water jet)
Weight & Size 5.8 kg (12.78 lbs), 178 mm (W) x 353 mm (H) x 170 mm (D)
Controller Trimble T10 Tablet with Trimble FieldLink over WiFi or Cable
Integrated Calibration System5
Full auto-calibration of range and angular systems in 25 seconds with
no user interaction or targets
TRIMBLE FIELDLINK FEATURES
Trimble Registration Assist
X7's IMU that tracks scanner orientation when moving from one
station to the next. Automatic registration, alignment and refinement
ensure the scan data is right before leaving the field.
Scan & Model6
Scan data can now be viewed with BIM model data for infield
analysis.
Infield Georeference Reference scan data to the project coordinate system.
Integrated Laser Pointer
Allows for collection of single point measurements as well as field
layout workflows.
Export Formats TDX, POD, LAS, Structured & Non-Structured RCP, E57 and TZF
1 On matte surface with normal angle of incidence
2 Specification given as 1 sigma
3 Albedo given @ 1550nm
4 Including automatic leveling & calibration
5 Laser Class 2, visible, 620-650 nm, for auto calibration
6 See FieldLink datasheet for info on BIM model and point data types
Specifications subject to change without notice.