Can I transfer HoloTint between different HoloLens 2 and/or XR10 devices?
Yes, the tint lens itself is easily transferred from one device to another, so long as both devices have
mounting brackets installed. If you plan to have more devices than HoloTint lenses, we recommend buying
just the mounting brackets for each device. These are available for $50 per set. Do not move brackets
between devices.
Will HoloTint fit in my existing HoloLens case?
Yes! You can keep the lens attached to your HoloLens 2 or Trimble XR10 and it will still fit in its case.
How heavy is the lens?
Trimble HoloTint adds 1.2 oz. (34g) of weight to the HoloLens device. This accounts for approximately a 6%
and 3% increase in weight on the HoloLens 2 and Trimble XR10 devices, respectively. In our testing, we
found the increased weight to be negligible on both devices.
Are the lenses scratch resistant?
Trimble HoloTint has a scratch-resistant coating applied as part of the last steps in the manufacturing
process. In our experience, this protects well against micro scratches. But, like any lens, there's really no
protection against deep cuts and gouges from harder materials. The lens is made of acrylic and will not
easily break or shatter if impacted or dropped.
Are the lenses impact rated?
The visor on all HoloLens 2 devices (with or without Trimble HoloTint) already has a basic impact
certification in compliance with ANSI Z87.1-2015, CSA Z94.3-07, EU EN 166, and AS/NZS 1337.1. Trimble
HoloTint does not negatively affect this rating. Since HoloLens devices do not provide protection to the
periphery, we strongly recommend that workers also wear protective eyewear under their HoloLens device
where required.
Are the lenses intrinsically safe?
The Trimble XR10 and HoloLens 2 Industrial Edition devices are already certified for intrinsic safety to the
requirements of UL Class I, Division 2 (UL 121202 & CSA C22.2 NO. 213). The HoloTint accessory doesn't
affect this certification.
Page 4
