Trimble X9
3D Laser Scanning System
DATASHEET
TRIMBLE FIELDLINK SOFTWARE
SYSTEM REQUIREMENTS
Operating system Microsoft
®
Windows 10
Processor Intel
®
8th Generation Core
™
i5 2.5 GHz processor or better
RAM 16 GB or better
VGA card Intel HD Graphics 620 or better
Storage 512 GB Solid State Drive (SSD), 1 TB recommended
FEATURES
Scanner operation Tablet or cable
Trimble registration assist Automatic and manual registration, refinement and reporting
Data interaction 2D, 3D and Station View
In-field documentation Scan labels, annotations, pictures and measurements
Auto sync Automatic data sync from one-button operation
Georeferencing Laser pointer for georeferencing and precision point measurement
Reports Registration, Field Calibration and Diagnostics reports
Data redundancy Data stored on SD Card and tablet
Data integration
Export formats to support Trimble and non-Trimble software
File formats: TDX, TZF, E57, RCP, LAS, POD
© 2023-2024, Trimble Inc. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Inc.,
registered in the United States and in other countries. Microsoft and Windows are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property
of their respective owners. PN 022519-216A-en-UK (04/24)
Trimble Building Construction Field Solutions
10368 Westmoor Drive
Westminster CO 80021
USA
fieldtech@construction.trimble.com
fieldtech.trimble.com/x9
1 Specification given as 1 sigma.
2 On 80% albedo. Albedo given @ 1550 nm
3 On matte surface with normal angle of incidence.
4 After automatic calibration and self-leveling within ± 10°.
5 Durations for scan times include self-leveling time within ± 10°.
6 Self-leveling will take ~ 10 seconds longer when scanner is not within ± 10°.
7 Scan times can increase up to 30 seconds for full calibrations after startup or idle time until thermal stabilization. Full system checks occur every 30 min.