Trimble Buildings Customer Success Stories
Issue link: https://fieldtech.trimble.com/resources/i/1508873
POSITIONING PERFORMANCE 3 Cont. CODE DIFFERENTIAL GNSS POSITIONING Horizontal 0.25 m + 1 ppm RMS Vertical 0.50 m + 1 ppm RMS SBAS 10 Typically < 5 m 3DRMS HARDWARE PHYSICAL Dimensions (W×H) 13.9 cm x 13 cm (5.5 in x 5.1 in) including connectors Weight 1.55 kg (3.42 lb) receiver only including radio and battery Temperature 11 Operating -40 °C to +65 °C (-40 °F to +149 °F) Storage -40 °C to +75 °C (-40 °F to +167 °F) Humidity 100%, condensing Ingress protection IP68 Certified per IEC-60529: waterproof/dustproof (1 m submersion for 1 hour) Shock and vibration Pole drop Designed to survive a 2 m (6.6 ft) pole drop onto concrete Shock Non-operating: 75 Gs at 6msec Shock Operating: 40 Gs at 10msec Vibration Mil-Std-810G, FIG 514.6E-1 Cat 24, Mil-Std-202G, FIG 214-1, Condition D ELECTRICAL Internal Rechargeable, removable Lithium-ion battery in internal battery compartment Internal battery operates as a UPS during an ext power source failure Internal battery will charge from external power source as long as source can support the power drain and is more than 11.8 VDC Integrated charging circuitry External External power input with over-voltage protection on Port 1 (7-pin Lemo 2-key) Minimum 10.8 V, Maximum 28 VDC, shutdown optimized for 12 V lead acid battery operation Power source supply (Internal/External) is hot-swap capable in the event of power source removal or cut off DC external power input with over-voltage protection on Port 1 (Lemo) Receiver automatically turns on when connected to external power Power consumption 3.2 W in rover mode with internal receive radio 12 5.2 W in base mode with internal 0.5 W transmit radio Operating times on internal battery 13 Rover 5.5 hours; varies with temperature Base station 5.5 hours; varies with temperature 450 MHz systems Approximately 4 hours; varies with temperature 900 MHz systems Approximately 4 hours; varies with temperature COMMUNICATIONS AND DATA STORAGE Lemo (Serial 1) 7-pin Lemo 2-key, Power Input, USB. Optional USB to RS232 serial cable Receiver supports RNDIS communications over USB Wi-Fi ® Client or Access Point. Receive or transmit corrections. Wi-Fi b/g/n Bluetooth ® wireless technology Fully-integrated sealed 2.4 GHz Bluetooth module Channel spacing (450 MHz) 12.5 kHz or 25 kHz spacing available Sensitivity (450 MHz) -114 dBm (12 dB SINAD) Radio modem Fully integrated, sealed 450 MHz wide band transceiver with frequency range of 410-473 MHz (RED 2014/53/EU compliant) or dual-band 450/900 MHz transceiver (410 MHz–473 MHz / 902 MHz–928 14 MHz frequency range) Transmit power 0.5 W, 1.0 W (1.0 W available only where legally permitted) (Note: 1 W is only available if "Transmit High Power" option is enabled) Range 3-5 km typical, 10 km optimal Frequency approvals (410 MHz–473 MHz) Worldwide, depending on the local required licensing Positioning rates 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz Data storage 9 GB internal data logging Data format CMR+, CMRx, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2 input and output 24 NMEA outputs, GSOF, RT17, and RT27 outputs (RTCM output not supported for 900 MHz UHF) Trimble R780 GNSS System SPEC SHEET fieldtech.trimble.com fieldtech.trimble.com