SPEC SHEET
Trimble
R780 Model 2
GNSS SYSTEM
The Trimble
®
R780 GNSS system is a highly accurate receiver
built to handle the toughest survey environments. Powered
by industry-leading positioning technologies such as the
Trimble ProPoint
®
GNSS engine and Trimble Inertial Platform
™
(TIP
™
) IMU-based tilt compensation, the ultra-rugged R780
elevates productivity in one adaptable, scalable system.
Performance specifications
GNSS TECHNOLOGY
Constellation agnostic, flexible signal tracking, improved positioning in challenging environments
1
and
inertial measurement integration with Trimble ProPoint GNSS technology
Increased measurement and stakeout productivity and traceability with Trimble TIP technology
IMU‑based tilt compensation
Trimble CenterPoint
®
RTX correction service is activated and ready to use for the initial 12 months.
Learn more at rtx.trimble.com
Advanced dual Trimble Maxwell
™
7 chipset technology with 672 channels
Trimble EVEREST
™
Plus multipath signal rejection
Trimble IonoGuard
™
technology for mitigation of ionospheric GNSS signal disruptions
Spectrum Analyzer to troubleshoot GNSS jamming
Anti‑spoofing capabilities
Supports Trimble Internet Base Station Service (IBSS) for streaming RTK corrections using
Trimble Access
™
2023.10 or later
Japanese LTE Filtering below 1510 MHz allows antennas to be used 100 m away from Japanese LTE
cell tower
Iridium Filtering above 1616 MHz allows the antenna to be used 20 m away from Iridium transfer
SATELLITE TRACKING
GPS: L1C, L1 C/A, L2E (L2P), L2C, L5
GLONASS: L1C/A, L1P. L2C/A, L2P, L3
Galileo: E1, E5A, E5B and E5AltBOC, E6
2
BeiDou: B1, B2, B3, B1C, B2A, B2B
QZSS: L1 C/A, L1C, L1S, L2C, L5, LEX/L6
IRNSS: L5
SBAS: L1 C/A (EGNOS/MSAS GAGAN/SDCM), L1 C/A and L5 (WAAS)
L-Band: Trimble RTX
®
trimble.com/products/building-construction-field-systems/r780
